Відео

hi, nice work. are you using the original risers? does it work for the xv 535 too?

Hey mate just installed mine but it didn’t have instructions. On the new ecu there is 2 led lights what do they represent? Thanks

I'm probably gonna do this since I need to replace my air filter anyways... However, what's that other filter thing I saw you install?

Why do you shake the camera while taking the vid? This vid is useless.

I’ve been trying to find a video on fuel filter change out for a 250 can’t find one and haven’t been able to locate it on my bike looks like it might have been taken out where should I install the new one I bought

This Vstar 650 is awesome....it is the rat chop thats perfect!!!

Hello...from Woodstock, NY! I have had Harleys, Triumphs, Bmw's,Kawasaki, xs650's, Intruders, Kz 450 and a 1979 Kz1000ST...ST for shaft. This Ironhead is my 23rd build and tge last Harley I will do! I don't need a 1,000, 1200, 1600, 1800 or 2,000cc bike..it's becoming ridiculous! I am going the opposite, Want to get a vstar 650, make it a bobber and ride. I do not care where it was built....it all comes from humans on Earth the last I knew! So, I short, ride what you want,when you want and that is Freedom, not what some club wNts me to ride! The vstar 650 is plenty of bike and will last a lifetime! A air-cooled vtwin shaft drive that you don't need a second mortgage for...they are great!

mine doesnt make any difference

Great Vid! I laughed when I saw your rear view mirrors - always a good idea to keep an eye on the front of your jacket!

I want to try in my gas tank scrambler...😎🤘alltry

19t 38t - Gear Ratio 2.00. ENough torque - 41.3 Nm.

Great video , lots of information throughout 👍 wanted to to know if you experienced lots of noise or vibrations going over 120 kmph or about 4800 rpm on 5th gear ? Current setup : cobra slip ons , stock pilot jet , 130 main jet , pod kit air filters , 3.5 turns out. Im not happy with the performance on warm days and im switching to K&N clamp on as Im hoping it will breathe cooler. Im using your other video and setup when i switch from pods to the k&n

Love the mod 🤌🏻….. I have been looking for a good quality seat as well. If you could please share the link of this particular seat. There are lot of seats on ebay which i dont trust would be the same as this one.

What’s the laws on this seat, I’m in qld. Are these seats legal if you’ve got a single seat motorbike registered?

Even though its been 6yrs, I want to say THANK YOU! I recently bought my first motorcycle, being a 98 Virago 250, and this is basically the ONLY video that actually shows the idle adjustment, not just referencing it (if at all). And your explanation was so easy to follow, I was able to adjust my own without too much trouble and get it going. I've been struggling for days, despite tons of Google, UA-cam, and Reddit, and your video got me adjusting and riding in minutes. I knew what to listen for and what to adjust, how to turn, and you go straight from point A to B while providing simple to understand explanations and tips. Seriously, you not only showed what to do but gave a simple explanation on the why behind it all and riding afterwards gave a great example of good sound and performance, what you might experience if off and advice on how to fix ( or if too rich which mine was doing). All great for someone like me with all experience gained being this summer with this new to me motorcycle. I am extremely thankful for this video, thank you so much.

got my bike running somewhat good but the air fuel screw doesnt do anything. 20 115 jets

Nice ! I just bought a 2009 Candy Apple Red XVS1100A with Vance Hines pipes and I put heated handlebar grips and quadlock. Loving the long trips. I used to enjoy my XVS650 for the Sydney commute but the 1100 is definitely more fun on the open road now.

the breathers aren't all breathers some of them are overflow pipes

I have been watching your videos of the Yamaha virago 250cc and I have to say that this bike is so well tuned almost to perfection, just listening her beautiful sound tells me that you are a very good mechanic. Keep it up, God bless, and be safe

Top speed on that last gear?!

great vid thx , question the parking light in the led headlight has just one cable and the ones in the bike has two , how did you connected tem , where the ground goes ? thx a lot mate

Hey when I changed out my handlebars I somehow messed up the start button do you have any idea where the issue might be (it doesnt start the bike at all)

Does this fit a Yamaha virago 1100????

Are those adventure tires?

Hi mate i just got a 650 any idea why someone would disconnect the hose that goes to the bottom of the air filter bowl and block it off ?

I think you should only recommend the NGK BPR6EIX plug only if you also go with the NGK LZFH NON-resistor boot, since having a stock resistor boot with a resistor plug (BPR6EIX IS A RESISTOR PLUG) is a bad combo.

Hi is the gas cap a vented one or not buddy

some clear coat and itll be fine

best rusty paint.. spray some top coat and itll be fantastic

Sick! I’ve learned so much from your videos working on my first bike (virago 750 as well) So you were able to reach this new bar height with the original cable lengths and lowered risers?

Hello from north east scotland, have a 2001 sv650s in blue, standard with a scorpion end can,had the bike 20 years with no problems at all Great bikes CHEERS FROM BONNIE SCOTLAND

thanks for the vids, im curious how these air filter mods on both sides hold up to the wind? seems like without the extra anchor points like on the original pod filter boxes the new ones may catch alot of wind and get beat up? my virago 750 is my first bike so i baby the heck out of it

Building one myself right now, think ima go for a matte black with the chrome

Why doesn't everyone just leave those mufflers alone?! You just gotta buy that ebay junk and usually upset the neighborhood. The ideal Noise/Performance envelope of a modern bike muffler comes from the factory, NOT in your backyard. More and more people, AND local authorities are imposing noise ordinances, and bikers are wondering why. Keeping it stock is ALWAYS cheaper than home wrenching with substandard and often illegal parts. Dude says so in his opening graphic: "Mods are not necessarily legal or safe." There is nothing manly, macho or powerful about making noise. These are ploys to draw attention to themselves. Points to a lack of self confidence, a need to impose one’s presence on others. Lack of self-esteem, hiding behind an over-blown ego. No real achievement to show, hence taking the easy way of making noise. Complete lack of consideration about other people’s personal spaces and privacy. People with loud exhaust system - this is how I and so many people see you. Yes, I ride too, but I don't RILE my fellow humans with unnecessary exhaust noise.

Hey man, I love this build. I'm currently building my own custom xvs650. I've had the bike for about 6 years now, and I know it inside and out, but i am ready to start down the custom road with her. Your videos have been a huge inspiration in my journey to where I am and where it's going. As a fella over in the states, it's also cool to see the roads and scenery over there. There are some roads you video that I swear could be here in Tennessee. Just plain beautiful. Anyway, I had a question about the velocity stacks you used. How have they held up over time? Did you ever need to put a hood on then or go a different route? Looking at options to remove my dog bowl and air box when I remembered them and was curious how it's gone long term. Hope you're doing well and would be sick to see you make a return to these builds on your channel one day.

Nice video. I love my Vstar 250 they are such fun bikes and just overall such easy maintenance. Engine tuning can be tricky I live in super high altitude my Vstar can be very tough to get just right.

Im wanting a 1996 virago for $2000. Is that too much to pay ?

For those that don’t know bleach and ammonia make toxic gases called chloramines known as Phosgene gas which is mustard gas. Be careful. When bleach and vinegar are mixed, it creates a harmful chlorine gas. This will rust the tank. Just thought this info should be out there to be careful.

thanks for this nice video,im having a problem where i could find a 10 or 10 1/2 inch eye to eye for my 1976 honda cb400f that has a 12 1/2 which is too high for me lol"thanks

I just bought 2019 classic 500 silver with 1.011 miles.

To patina stainless, I would heat it up with a torch and quench in oil and then maybe sand a bit, do that couple times and you got a somewhat rust resistant antiqued finish on your steel parts

One of the dumbest things ever. If you want a hardtail then get one. But replacing your rear suspension with two pieces of steel tubing is just dumb and it looks dumb.

I Chris just checking in I see you haven't made any videos for a bit..so just checking in your OK mate hopefully your OK & see you back soon I buy you coffee then boy .take care people enjoy riding your your bikes 🤪😉😊👍☕️

Luv it turned out really good 👍

I’ve got a 2001 Suzuki Intruder gs 1400 got any ideas for a headlight upgrade?

Hey! Great videos, looking to do this to my xv1100. What size (mm) are the shocks you fitted?

Nice looking Bike, Stephen.

Just got my bike back from dealer. They hooked it up to a co2 gauge. With podkit 130 main jet 27.5 pilot jet and needle clip on lowest notch. It was still running a bit lean on full throttle. So if people go for this set up consider 135 or even 137.5 main jet....👍

Your this video is not recorded in good angle. Also much fluttering. Hope good in future.

is goldstar exhaust sounds lower than indori exhaust?